Call Now : 1-800-862-0654

Archive 2018

How to Setup tplink router | tplinkwifi.net

TP-Link is one of the best networking hardware providers to the users. They provide some of the best and most reliable routers and accessories to the users. Their routers can be configured with the help of the advanced features to better setup and configure the user’s network. The user can gain access to the advanced features of the router by logging in to the router. The login process is very simple and only takes a couple of minutes of the user’s time. The user can simply go to www.tplinkwifi.net and enter the default information regarding the router whenever prompted. The user will then be taken straightaway to the login page of the router. The default username and password is “admin” for most of the TP-Link routers.

There are a lot of benefits to logging in to the TP-Link routers. The user will gain access to the advanced features of the router only after logging in to the router. Some of the advanced features are:

  • The Parental Controls
  • The Guest Network
  • The Network Speed Test
  • The Media Prioritization
  • The Network Map

The user can also change the username and password for the router. This way, the user’s network will be kept secure and no one can access their network without their permission. The user can also update the firmware of the router. The firmware is the software which runs the hardware of the router. The firmware must be updated so that the security on the router is kept up to date and in check. All the sensitive data of the user flows through the router such as the private information of the user, their emails and passwords, the banking information of the user when they buy something online and more. The new firmware might also add some new features to the router and provide overall speed boosts.

tplinkwifi.net login

Here, we will show you the setup and login process to the TP-Link routers using the Quick Setup:

  • Connect the desktop computer to the TP-Link router using an Ethernet cable.
  • Open an internet browser and type www.tplinkwifi.net in the address bar. Press enter.
  • The login page will display. Enter the default information when prompted.
  • The default username and password are “admin” for most of the TP-Link routers. The username and password are case sensitive.

TP-Link routers are required by the user to initially login to the routers after the setup has been completed. There is a huge array of advanced features that TP-Link routers provide the user with the help of which the users can configure and personalize their network that is most suitable to their needs. The login process is very simple and it only takes a couple of minutes of the user’s time. The user can simply open any internet browser and type www.tplinkwifi.net in the address bar to access the router’s admin login page. There, the user will be prompted to enter the default information regarding their router. The username and password are case sensitive.

Once the user has successfully logged into their router, the user will be able to access the web based interface for the router. There, the user can further configure their network using the advanced features of the router and the default configuration settings. The user can configure control, customize, monitor and even repair their network themselves. Here are some of the advanced features of TP-Link routers:

  • Parental Controls – This feature allows the user to restrict access to any unwanted or malicious websites or block any age inappropriate content on the user’s network. This way, the user will be able to keep their network secure from any dangerous content. The user can also limit the access of internet usage on any specific device for a limited period of time.
  • Network Map – This feature allows the user to check for the exact number of devices that are connected to the user’s network.
  • Guest Network – With the help of this feature, the user can create alternate guest networks other than their main networks. This way, if there are any guests visiting the user’s place and wish to use their internet, the user can simply create a guest network for a limited period of time. The guest can simply connect to this network and gain access to the user’s internet without gaining access to the user’s main network and its shared contents.

Here, we will help the users understand their router better by providing the troubleshooting steps to update the firmware of the TP-Link routers.
Here are the troubleshooting steps to update the firmware of the TP-Link routers:

  • Download the latest firmware for your TP Link router from the TP Link support website. Make sure the model number of your router is correct.
  • Save the downloaded file to your desired location on your computer.
  • Now, open up an internet browser and type www.tplinkwifi.net in the address bar. Press enter.
  • You will be asked to type in the default username and password. The default username and password is “admin” for both cases. The username and password are case sensitive.
  • Once you have logged in, the Quick Setup guide will display. Click System Tools.
  • You will see the Firmware option on the justify side. Click Browse.
  • Locate the previously downloaded file from your computer and click OK. Click the Upgrade button to start the firmware upgrade process. It will take only a couple of minutes for the router to upgrade the firmware. After the firmware upgrade has finished, the router will reboot itself. Wait for the router to finish rebooting itself. Do not unplug the router or interrupt the reboot process.

Now, the firmware of the TP-Link router will have been updated successfully. From here, the user can start using their router as they desire.

Some important things to consider while updating the firmware of the TP-Link router:

  • Do not unplug the router from its power source during the firmware update as it can damage the router’s firmware and might even render the router useless.
  • Do not download the TP-Link router’s firmware from any third party websites.

TP LINK

TP Link is one of the best when it comes to providing networking hardware and accessories to the users. They provide very reliable routers and accessories which more than are suitable for homes and small businesses. Their routers need to be setup and logged in first so that the user can personalize their network suitable to their needs. The setup process is very easy and it only takes a couple of minutes. The user can just type www.tplinkwifi.net in the address bar of any internet browser of their choice and get to the login page of their TP Link router. The user needs to login to their routers so that they can get access to the advanced features of the router such as the Guest Network, Parental Control, to change the username and password for their router so that they can secure their network, to upgrade the firmware on their router and more.

What is www.tplinkwifi.net? 

The web domain name www.tplinkwifi.net is the domain name that is used to login to the TP Link router. The users had to either find out or remember their router’s default IP addresses to login to their routers. It was a little troubling for some users as they did not know or just couldn’t find out the default IP address for their routers. So, TP Link made it easier for their users to be able to login to the routers. The router recognizes the web domain name and translates it to the default IP address of the router and reroutes the user directly to the login page of the router. The user just needs to type in the default information of the router. The default username and password for most of the TP Link routers is “admin” for both cases. The username and password are case sensitive.

For the router to keep working properly and so that the user doesn’t face any trouble logging in to their router, the user needs to keep the firmware of their router up to date. TP Link releases the firmware update regularly so that their users do not face any troubles with the router. The main concern of an updated firmware is security. The firmware update makes sure that the security on the router is up to date and that it isn’t vulnerable to any potential threats. All the sensitive information of the user passes through the router such as their private information, their banking details, their emails and passwords and more. So it is very important to keep the firmware of the router up to date. Other than that, the new firmware removes or fixes the bugs or resolves any previously faced issues with the router, and might even add some new features to the router, enhance the overall speeds of the router and provide more stability. The firmware update can be done after logging in using www.tplinkwifi.net and going through the Quick Setup of the TP Link router.

Here, we guide users through the setup and installation process, help to upgrade the firmware of the router, to reset the router and to change the username and password using the Quick Setup of the router.

How to setup the TP Link router for the first time using Quick Setup

There are some pre requisites required for the setup process. They are:

  1. A desktop computer for the setup and installation process.
  2. Ethernet wires for the connections to be made.
  3. A working internet connection.

Here are the steps to setup the TP Link router for the first time:

  1. Connect the desktop computer to any of the LAN ports of the router using the Ethernet cable. It is recommended that the initial setup is done with the help of a desktop computer. Make sure the connections are made properly.
  2. Now, connect the modem to the WLAN port of the router using another Ethernet cable. Make sure the connections are made properly.
  3. Switch off the modem, router and the desktop computer and switch them on. Wait for all the devices to finish booting up.
  4. Open up an internet browser of your choice and type www.tplinkwifi.net in the address bar and press enter. A login page will display.
  5. When the login page has displayed, it will prompt you to type in the default information for your router. The default username and password are “admin” for both cases. If the user cannot access the Quick Setup via the default password, then there is a chance that the user might have changed the password. Try logging in with any other passwords. It that fails too, then the router needs to be reset in order to restore it back to its factory default settings.
  6. After you have logged in, the Quick Setup will display. Click Next to start personalizing your network as you desire.

How to setup and login into your TP-LINK router. ( tplinkwifi net )

TP Link provides networking hardware to the users globally. They provide reliable networking hardware and accessories such as routers, extenders, modems, switches and more. They provide a very reliable user experience with a smooth interface. Their routers need to be logged in before the user can access the advanced features of the router. The users had trouble logging in to the routers with the default IP addresses specific to their routers. TP Link provided a solution to this problem. They now ship their routers preconfigured to use www.tplinkwifi.net as the default login address for most of the routers.

The web domain name www.tplinkwifi.net is recognized by the router and translated to the default IP address automatically and the user is then displayed the login page of the TP Link router. Only after logging in to the router can the user get access to the advanced features of the router such as the Parental Controls, the Guest Network, Media Prioritization, the Network Speed Test, to change the username and password for the router, to update the firmware of the router and a lot more.

The user can simple go to the www.tplinkwifi.net web domain and login using the default information of the router. The default username and password is “admin” for both cases. The username and password are both case sensitive. Once the user has logged in to the router, it is advised that they change the default username and password for the router to secure their network. With the help of the advanced yet User-Friendly Quick Setup page, the user can now manage, control, monitor and even repair their network themselves.

Here, we will show you the troubleshooting steps to setup and login to the TP Link router.

How to setup and login to the TP Link router

  1. Connect the desktop computer or a laptop to any of the LAN ports of the router using an Ethernet cable. Make sure that the connections are made properly on both ends.
  2. Now, connect the modem to the WLAN port of the router using another Ethernet cable. Male sure the connections are made properly.
  3. Turn off the computer, the modem and the router and turn them back on. Wait for the devices to finish booting up.
  4. Open any internet browser on the same device that is connected to the router. Type tplinkwifi.net in the address bar. Press Enter.
  5. You will see a pop up window asking you for the default information of the router. The default username and password is “admin” for both cases for most of the TP Link routers. The username and password are case sensitive.
  6. After logging in, the Quick Setup will appear. Click Next to get started.
  7. Your router will have been setup and logged in.

The user will now have setup the router and logged into it. The user can configure, control, monitor and even repair their network themselves without any problems. The user can even personalize their network most suitable to their needs.

How to log in to tplinkwifi.net to configure the router

Tplinkwifi net

In order to make an entry into the router setup via host – you just need to start any Chrome, Internet Explorer, Edge or Opera web browser. In the address bar, where you usually register the address of the required Internet resource, we register the address of the site of the router: tplinkwifi.net, tplinkmodem.net. And press the Enter button.

The result will be an authorization form in the so-called Personal Cabinet of the router – Web Interface. For login, the default login and password are admin / admin.

If suddenly the input through tplinkwifi.net or tplinkmodem.net is not available and the login request with the password does not appear, but the error “Failed to display this page”, then most likely the problem with the settings of the network card or the operating system. In this case, it will be easier and faster to go in the old way – through the Ai-pi. But the question arises – how to find out the IP address of the TP-Link router. Very simple! Open the network connections of Windows 10 and right-click on the network connection through which the modem or router is switched:

  • In the menu, select the “Status” option. After that the following window will open:
  • Click on the “Details” button to access the information about the network connection.
  • In the window that appears, carefully look at what IP address your computer receives and what is written in the line “Default gateway” – this is the IP router. Typically, 192.168.0.1 or 192.168.1.1 is used. Then simply register in the address bar of the browser instead of net and press the Enter key.

After that, the personal configuration of the TP-Link router should open without problems.

Click here to Back <<<<<<

TP Link Router Login

TP Link has been a global provider of networking devices from a long time and it is one of the best in the market along with a few others. TP Link makes sure the users get performance, network stability and value for their money. Logging in to the TP Link router can be a little difficult for some people as not everyone is tech savvy. But worry not, here in this blog we will show you the steps to login to your TP Link router.

Starting with your TP Link Router

TP Link Wi-Fi Routers usually have default IP addresses for their models. But the most common IP address is 192.168.1.1. This will take you to the login page of your router. There, you will be prompted to put in the default username and password. A router has to be installed and logged in for the first time when bought. It only takes a few minutes usually to set up the router for the first time. Alternatively, you can visit www.tplinkwifi.net  in a web browser. The login page will then ask you to put in the username and password. The default username and password are provided at the back of the router.

Steps to Login to your TP Link Router:

1.   Using an Ethernet cable, connect the modem to the LAN port of the TP Link router.

2.    Plug in the router to a power source and switch it on using the Power On/Off button at the back of the router.

3.   Now, connect your device to the wireless network that you wish to set up using your router. The default username and password are printed at the bottom of the device.

4.   Open up any web browser of your choice on your device connected to the network and type www.tplinkwifi.net in the address bar.

5.   A page will display asking you to type in the default username and the password. Type that in.
If by any case your default username and password doesn’t work, that means you might have set a personalized password. In that case, put that in.
If you have lost or forgotten the password, then a factory reset will be needed.

6.   After logging in, a panel will open labeled as Quick Setup. Click Next to get started.

7.   In the Wireless Network Name field, you can wish to put up a personalized username for your network to make it easier for you and your devices to recognize your network with ease. It is recommended that you do not put in the personal information or the information of the type of the router you are using.

8.   Similarly, in the WPA-PSK/WPA2-PSK field, you can set a personalized password for your network. Make sure that it’s a strong password so that people cannot guess it easily.

9.   Click Next. And then click Finish.

10 You will now be disconnected from your wireless network. After that, you can sign in using your new username and password.

error: Content is protected !!